JAPANESE

ABOUTNEWSCONTACTPRODUCTS
MATERIAL DIVISIONMACHINERY DEPARTMENT
.BRAZING MATERIALBRAZING MATERIAL .BRAZING EQUIPMENTBRAZING EQUIPMENT .FLUXFLUX CONNECTING FIGURE FOR BRAZING EQUIPMENT
TOP > MATERIAL DIVISION > FLUX/Vapour Flux





Vapour Flux is different from conventional method that uses powder type flux or paste type flux directly applied on the work. The Vapour Flux, specially blended evaporative liquid flux, is vaporized in the special tank and mixed with the heat source gas such as acetylene, LPG etc. This is the very revolutionary flux. This gas fluxing method joining under the partially non-oxidizing conditions is very similar in the concept to the Argon arc welding method. Vapour Flux does not require much investment in equipment nor has the high running costs compared with the Argon arc welding method. Flux in the flame remove the oxide and flux is completely burned off. Consequently, there are no slug inclusions in the fillets. There is no need to remove the remaining slug. Vapour Flux is a stable material. Brazing with Vapour Flux results in clean and bright finishes that will not be corroded and discolored for a long time.
- ADVANTAGES

* Remove surface oxides
* Prevent oxidation during brazing
* Promote efficient brazing
* Easy to remove flux residue
* Saves brazing material
* Reduction of brazing time
* Decreasing inferior product


- TYPES

BL-5 BL-7 BL-8 BL-12 BL-M BL-T
- FORM FOR CONTAINER, CAPACITY AND PACKING

FOR INLAND
3L Polyethylene container 6 bottles / case
4L Square can 6 bottles / case
4L Round can 6 bottles / case
5L Polyethylene container 4 bottles / case


FOR OVERSEA
4L Square can (UN) 6 bottles / case
20L Pail can (UN)
200L Drum can (UN)


Copyright(C)2006 DAISHIN INDUSTRIAL CO.,LTD. All Rights Reserved.

Daishin Bronze
MIG Brazing Wire (Silicon Bronze)
Dasihin Aluminum Flux Cored Wire (DCW)
Various Silver Brazing, Phosphor Bronze Brazing

N-500
N-1000 + Valve-less Torch Set
D-2500
Vapour Tank
V. Auto Tank

Vapour Flux