JAPANESE

ABOUTNEWSCONTACTPRODUCTS
MATERIAL DIVISIONMACHINERY DEPARTMENT
.BRAZING MATERIALBRAZING MATERIAL .BRAZING EQUIPMENTBRAZING EQUIPMENT .FLUXFLUX CONNECTING FIGURE FOR BRAZING EQUIPMENT
TOP > MATERIAL DIVISION > BRAZING EQUIPMENT/N-500




N-500(DE SAVER)

No Pilot Flame.
DE Saver is the product featuring "COST-DOWN" "SAFETY"
and "EASY OPERATION" for gas welding and gas brazing
operation.
Using DE Saver, what an operator has to do is only to ignite the torch at beginning of gas welding or brazing operation and to hang it to the hanger for extinguishing the torch after the operation. There are no troublesome valve adjustments of the torch. The ignition to the torch can be done by only spark igniter and saves the gas consumption.

The gas discharge will stop within 2.0 seconds, when the torch fall off from the hanger or the device falls down caused by emergency disasters such as an earthquake or an accident. Moreover, the gas discharge will also inevitably stop, when a power supply is cut off. Then after an electric power is restored, the gas does not discharged, as the solenoid valves are locked with "FULL INTERLOCK" system.

Because of no pilot flame, there is no choke at pilot nozzle and the ignition method is spark, there is no influence by fan or spot cooler.

- SPECIFICATION

Rating voltage AC230V
Outer dimension 120(W)x116(D)x230(H)mm
Weight Approx. 4kg
Ignition method Spark ignition
Flame detection Flame rod
Connecting method Hose joint/Flame nut (M16-P15)

Copyright(C)2006 DAISHIN INDUSTRIAL CO.,LTD. All Rights Reserved.

Daishin Bronze
MIG Brazing Wire (Silicon Bronze)
Dasihin Aluminum Flux Cored Wire (DCW)
Various Silver Brazing, Phosphor Bronze Brazing

N-500
N-1000 + Valve-less Torch Set
D-2500
Vapour Tank
V. Auto Tank

Vapour Flux