JAPANESE

ABOUTNEWSCONTACTPRODUCTS
MATERIAL DIVISIONMACHINERY DEPARTMENT
Type-HS Type-HS-T Type-T Type-C Type-R .AUTOMATIC VARIOUS UNITSAUTOMATIC VARIOUS UNITS
TOP > MACHINERY DEPARTMENT > AUTOMATIC VARIOUS UNITS


The device heats work up to the temperature of brazing and motions a back and forth the burner, up and down the burner, 2 steps heating and swing, etc. by the specification.
^ PAGE TOP


This device is pre-heating for base metal. It is a unit to shorten cycle time when the number of production is numerous.
^ PAGE TOP



CLICK
^ PAGE TOP


The device is to supply the wire to the wire nozzle. The supply of wire and return can be done by forward and reversely rotating the supply motor. It is possible to adjust amount of supply of wire and feeding speed of wire by the encoder control.
^ PAGE TOP


The device is enabled with making to equal heating and delicate brazing by the thing that the burner swings. The speed of the swing can be adjusted according to the volume of the swing motor. There are the back and forth swing and a right and left swing.
^ PAGE TOP


The device controls gas and oxygen (air) supplied to heating and pre-heating burner. The pressure switch is installed in circuit of gas and oxygen (air), and it rings of abnormality with the buzzer etc. when pressure decreases. The pressure switch is a numerical display.
^ PAGE TOP



CLICK
^ PAGE TOP



The device is to supply the wire to the point of brazing. The each of 2 wire cylinders set up right and left. The device motions back and forth with wire nozzle and supplies the wire by air cylinder. There is a number of the wire nozzle depending on the volume of works in case of each 1 of right and left.

CLICK
^ PAGE TOP


Absodex made of CKD is used for the rotary unit of table. By installing of absodex
(1) Highly accurate rotation with calculation positioning
(2) High torque
(3) The starting point return is unnecessary according to the positional detection resolver of absolute.
(4) A smooth drive by optimal curve of cam speed, etc.
^ PAGE TOP



The device can be the brazing before a necessary flux application by the automatic operation. It takes in the brush that the paste flux is installed in the point when it installs in front of the station with brazing of table type, and work arrives at the station, it moves to works and application. The worker is reduced improvement and the load of cycle time by automation.
^ PAGE TOP



The device refrigerates after with brazing by air and water cooling. Air cooling is used by the material of work, then air and water cooling are combined and used only for water cooling >> air cooling, only air cooling or etc.
^ PAGE TOP


The device is an automatically ignites the burner. It is confirmed whether to ignite the burner when the machine with brazing robot and porous burner are used by the extinguish fire detection.
^ PAGE TOP


Copyright(C)2006 DAISHIN INDUSTRIAL CO.,LTD. All Rights Reserved.

Heating Unit
Pre-heating Unit
Gas Controller
Wire Feeding Unit
Burner Swinging Unit
Gas Box Unit
OHS
Face-fed Brazing Equipment (Soft Feeder)
Rotary Index
Automatic Flux Application
Water / Air Cooling Unit
Automatic Ignition